Areo Tank Propane Storage Vessels are constructed using 100% U.S. produced, SA516 Grade 70 steel, employing full penetration butt welds on all seams. Normal operating pressure is 250 psi at 125º F. We manufacture propane vessels for both above and below ground installation.
Standard Vessel Features
- Volume 3,900 to 50,000 Gallons
- ASME "U" Stamp
- National Board Registration
- Test Pressure 325 psi (250 psi WP at 125º F)
- RT1 X-Ray Inspection on welds
- 18" Flanged opening with blind flange cover for access
- 100% U.S. made SA516-70 High Strength Carbon Steel
- Grounding Connectors (aboveground)
- Surface Preparation - SSPC SP-6
- Exterior coatings:
- Underground - 75 mils of high-solids polyurethane protection and sacrificial anodes with a 10-year Limited Warranty
- Aboveground - High-solids Epoxy Primer with Polyurethane Finish Paint
- ASME 2:1 elliptical heads - allows for more fuel storage in the same space as conventional heads. - Optional hemispherical heads available
- Vessels welded to code by certified welders.
- External Connections:
- Threaded full couplings up to 4" diameter
- Flanged fittings - 1/2" and up
A wide variety of optional equipment and accessories are available for tailoring our propane vessels to meet your specified design criteria.
Volume USWG | Diameter | Straight Shell Length | Overall Length |
3,900 | 7' - 0" | 12' - 0" | 15' - 9" |
6,565 | 7' - 0" | 21' - 0" | 24' - 9" |
12,000 | 7' - 0" | 40' - 6" | 44' - 3" |
18,000 | 9' - 1" | 35' - 0" | 39' - 10" |
30,000 | 9' - 1" | 42' - 0" | 39' - 10" |
30,000 | 11' - 0" | 39' - 9" | 45' - 7" |
50,000 | 9' - 1" | 60' - 0" | 64' - 10" |